Flex Cable for TFT Touchscreen – 8″
CONFX-001662This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. The socket connector on the cable is symmetric so if it isn’t working the way you like, flip over the connector into the socket.
$4.90 |
Customers Also Viewed
- Motors, Gear Motors, Raspberry Pi, Raspberry Pi Motor Drivers
DRV8835 Dual Motor Driver Hat for Raspberry Pi – 1.2A
Motors, Gear Motors, Raspberry Pi, Raspberry Pi Motor DriversDRV8835 Dual Motor Driver Hat for Raspberry Pi – 1.2A
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.
Part Number: RASPB-002753 - Cables & Connectors, IDC Ribbon, Cameras, Raspberry Pi, Raspberry Pi Cameras
Flex Cable for Raspberry Pi Camera – 24″
Cables & Connectors, IDC Ribbon, Cameras, Raspberry Pi, Raspberry Pi CamerasFlex Cable for Raspberry Pi Camera – 24″
This cable will let you swap out the stock 600mm long flex cable from a Raspberry Pi Camera (either ‘classic’ or ‘NoIR’ type) for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Part Number: CONFX-002143 - Motors, Gear Motors, Raspberry Pi, Raspberry Pi Motor Drivers
MC33926 Dual Motor Driver Hat for Raspberry Pi – 3A
Motors, Gear Motors, Raspberry Pi, Raspberry Pi Motor DriversMC33926 Dual Motor Driver Hat for Raspberry Pi – 3A
This add-on board enables a Raspberry Pi B+, A+, or Pi 2 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips I/O pins for more specialized applications.
Part Number: RASPB-002755 - Raspberry Pi
USB Infrared Remote for Raspberry Pi
Looking for a USB remote for your Raspberry Pi This IR remote works great with the Raspberry Pi as you do not need to install any drivers to get it working. Simply connect the USB end to your Raspberry Pi and you are ready to go!
Note:CR2032 battery is not included.
Part Number: RASPC-276089 - LEDs & LCDs, LED Matrix, Raspberry Pi, Raspberry Pi Displays
16×8 LED Matrix Board for Raspberry Pi
There are limited I/O pins on the Raspberry Pi which makes driving 128 LEDs quite an impossible task. This LED Matrix Board was specifically designed for the Raspberry Pi which uses 1 SPI interface (3 IO + 2 enabled) to control 64 LEDs which makes LED control for the Raspberry Pi much easier!
This module is compatible with the Raspberry Pi B, B+, Raspberry Pi 2 Model B. Just make sure you connect the GPI01 pin with the GPIO1 pin on the LED matrix board.
Part Number: RASPD-008800
