Motor Rating @ 6V:
- Speed: 130RPM
- Torque: 1.5kg*cm
The FS90R micro full rotation servo motor has dimensions of 23.2mm x 12.5mm x 22mm. The operating voltage for this motor ranges between 4.8 to 6V. Unlike the traditional servo motors which can only rotate around 180 degrees, this servo motor can be continuously rotated like a DC gear motors. This servo motor comes with the servo horns and related hardware components.
This sub micro size servo motor has dimensions of 23 x 11 x 29mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3 0.8-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 9 A without a heat sink.
This gearmotor is a miniature (0.94″ x 0.39″ x 0.47″), high-quality, low-current motor with 150.58: 1 metal gearbox, similar to Sanyo s popular 12 mm gearmotors. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft.
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.