Motor Rating @ 6V:
- Speed: 60RPM
- Torque: 6kg*cm
The FS5106R high torque full rotation servo motor has dimensions of 40.7 x 20.5 x 39.5mm. The operating voltage for this motor ranges between 4.8 to 6V. Unlike the traditional servo motors which can only rotate around 180 degrees, this servo motor has continuous rotation which can be used similar to DC gear motors. This servo motor comes with the servo horns and related hardware components.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
This gearmotor is a miniature (0.94″ x 0.39″ x 0.47″), high-quality, low-current motor with 150.58: 1 metal gearbox, similar to Sanyo s popular 12 mm gearmotors. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft.
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 600 mA at 3.9 V, allowing for a holding torque of 180 g-cm (2.5 oz-in). With a weight of 60 g, this is one of the smallest stepper motors we carry.
You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion. The dimensions of this analog feedback motor are 11.57 x 22.75 x 29.45mm. The operating voltage for this motor ranges between 4.8 to 6V. Servo horns and associated hardware are also included in the package.