Motor Rating @ 6V:
- Speed: 60RPM
- Torque: 6kg*cm
The FS5106R high torque full rotation servo motor has dimensions of 40.7 x 20.5 x 39.5mm. The operating voltage for this motor ranges between 4.8 to 6V. Unlike the traditional servo motors which can only rotate around 180 degrees, this servo motor has continuous rotation which can be used similar to DC gear motors. This servo motor comes with the servo horns and related hardware components.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 65: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
The CNC Shield makes it really simple to integrate CNC projects with the Arduino. You can add up to 4x A4988 stepper motor drivers to the CNC shield allowing for independent control of 4 bi-polar stepper motors.
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
This gearmotor is a compact (1.50″ x 0.59″ x 0.47″) brushed DC motor with 35: 1 metal gearbox. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.
This NEMA 17 size bipolar stepping motor has a 0.9 Degree step angle (400 steps/revolution). Each phase draws 1.7 mA at 3 V, allowing for a holding torque of 4.9 kg-cm (68 oz-in).