Motor Rating @ 6V:
- Speed: 60RPM
- Torque: 6kg*cm
The FS5106R high torque full rotation servo motor has dimensions of 40.7 x 20.5 x 39.5mm. The operating voltage for this motor ranges between 4.8 to 6V. Unlike the traditional servo motors which can only rotate around 180 degrees, this servo motor has continuous rotation which can be used similar to DC gear motors. This servo motor comes with the servo horns and related hardware components.
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
This sub micro size servo motor has dimensions of 23 x 11 x 29mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3 0.8-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 9 A without a heat sink.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
This gearmotor is a miniature (0.94″ x 0.39″ x 0.47″), high-power brushed DC motor with 150.58: 1 metal gearbox, similar to Sanyo s popular 12 mm gearmotors. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft.