Motor Rating @ 6V
- Speed: 0.14sec/60 degree
- Torque: 14kg*cm
The FS5113M high torque standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 180 degrees. This servo motor comes with the servo horns and related hardware components.
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis s battery terminals and motors, and the Arduino plugs into the shield, face down. The shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer and compass. It boosts the battery voltage to power the Arduino, and it breaks out the Arduino I/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection.
The FS5103B standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This NEMA 23 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 2A at 3.2V, allowing for a holding torque of 9kg-cm (125 oz-in).
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.