Product Description
Features:
- Type: Full Bridge
- Supply Voltage: 4.5 to 7V
- Output Voltage: 46V
- Output Current: 2A
You can quickly find and compare our selection of Motor Driver ICs with our specification list below.
Documents:
Gear Motors, Motor Drivers, Motors
L298 – Full Bridge Motor Driver (46V 2A)
ICSPE-000298The L298 is a dual full bridge driver which can handle 4.5-7V at 2A continuous current per channel.
$6.95 |
Customers Also Viewed
- Motors, Gear Motors
150: 1 15.5D Micro Metal Gear Motor (6V 85PM)
This gearmotor is a miniature (0.94″ x 0.39″ x 0.47″), high-quality, low-current motor with 150.58: 1 metal gearbox, similar to Sanyo s popular 12 mm gearmotors. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft.
Part Number: MOTOR-111097 - Motors, Servo Motors
Analog Feedback Servo Motor (1.6kg*cm)
You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion. The dimensions of this analog feedback motor are 11.57 x 22.75 x 29.45mm. The operating voltage for this motor ranges between 4.8 to 6V. Servo horns and associated hardware are also included in the package.
Part Number: UMTRS-001475 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors
Zumo Shield
This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis s battery terminals and motors, and the Arduino plugs into the shield, face down. The shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer and compass. It boosts the battery voltage to power the Arduino, and it breaks out the Arduino I/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection.
Part Number: ROBOT-312504 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors
VNH5019 Dual Motor Shield – 12A
Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear MotorsVNH5019 Dual Motor Shield – 12A
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
Part Number: ARDMD-002507
