Here is a simple LED for LilyPad, you can simply connect the LED with conductive thread with the lilypad!
$1.60 |
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They re even washable!
Documents:
There are 60 RGB LEDs per meter, and you can control each LED individually! Yes, that’s right, this is the digitally-addressable type of LED strip. You can set the color of each LED’s red, green and blue component with 8-bit PWM precision (so 24-bit color per pixel). The LEDs are controlled by shift-registers that are chained up down the strip so you can shorten or lengthen the strip. Only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for you.
The 1W High Power LEDs are comparable in brightness with the standard incandescent and halogen light bulbs. Not only are they bright, they also consume a fraction of power making them extremely energy efficient! This high power LED is mounted onto an aluminium heat sink. Simply connect the large + and – pads on the heat sink to activate the LED. This high power LED is rated for 3.7V 350mA.
The 1W High Power LEDs are comparable in brightness with the standard incandescent and halogen light bulbs. Not only are they bright, they also consume a fraction of power making them extremely energy efficient! This high power LED is mounted onto an aluminium heat sink. Simply connect the large + and – pads on the heat sink to activate the LED. This high power LED is rated for 3.8V 350mA 530nm.
