Product Description
Features:
- Output Voltage: 5V
- Maximum Input Voltage: 26V
- Maximum Output Current: 100mA
- Dropout Voltage: 0.3V
You can quickly find and compare our selection of Voltage Regulators with our specification list below.
Documents:
Voltage Regulators, Power
LM2931 – Voltage Regulator (5V 0.1A)
ICREG-002631The LM2931 is a positive voltage regulator with a fixed output of 5V at 100mA.
$2.20 |
Customers Also Viewed
- Power, DC to DC Converters
1.5-35V 3A Adjustable Step Down Regulator
This DC to DC step down module uses the LM2596 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 3A.
Part Number: PROPW-321230 - Power, Lithium Ion Batteries
Micro USB LiPo Charger
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well – charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.
Part Number: BATCC-910217 - Sales, Power, Wall Adapters
5V 10A Switching Power Supply
This is a high quality AC to DC switching power adapter which gives a clean regulated 5VDC output at up to 10A. These adapter works with both 110 and 240VAC input, allowing them to work in any country! The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
Part Number: ADADC-400591 - Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power
2.1mm DC Barrel (M) to Terminal Adapter
Cables & Connectors, Power Cables & Connectors, Screw Terminals, Power2.1mm DC Barrel (M) to Terminal Adapter
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5×2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.
Part Number: ADADC-010287 - Power, DC to DC Converters
12V 1.4A Step Up Regulator
The compact (0.32 0.515 ) U3V12F12 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 12 V. The pins have a 0.1 spacing, making this board compatible with standard solderless breadboards and perfboards.
Part Number: PROPW-002117
