- Input Voltage: 110VAC
- Output Voltage: 1.25 to 12VDC
- Output Current: 0.2A @ 12V
This DC to DC step down module uses the LM2596 switching regulator which provides a stable and constant power source. The output voltage can be adjusted between 1.5 to 35V with a maximum output current of 3A.
This is a high quality AC to DC switching power adapter which gives a clean regulated 12VDC output at up to 1A. These adapter works with both 110 and 240VAC input, allowing them to work in any country! The barrel plug attached to these wall adapters are center positive with 2.1mm diameter.
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5×2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The LiPo Charger Basic is stripped down of all features and just does one thing well – charge 3.7V LiPo cells at a rate of 500mA. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.
The compact (0.32 0.515 ) U3V12F12 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it to 12 V. The pins have a 0.1 spacing, making this board compatible with standard solderless breadboards and perfboards.