- DC Voltage Range: 200mV/2V/20V/200V/600V
- AC Voltage Range: 200V/600V
- DC Current Range: 200uA/2mA/20mA/200mA/10A
- Resistance Range: 200ohm/2Kohm/20Kohm/200Kohm/2Mohm
- Temperature: -20 to 1000 deg C
- Continuity testing
Intended for hobby and repair applications, Wire Glue is the first in a series of adhesive products based on microcarbon from Anders. In development are epoxies and other adhesive systems with unsurpassed durability and strength yet they will retain the low cost attributes of Wire Glue.
This is your basic spool of leadfree solder with 2.5% flux. The diameter of this solder is 0.8mm making it excellent for small soldering applications.
Mix: 99.3% tin / 0.7% copper
Strangely enough, that’s the technical term for this desoldering vacuum tool. Useful in cleaning up mistakes, every electrical engineer has one of these on their desk. To use, depress the end to engage the vacuum. Then heat up the to-be-desoldered joint until it is liquid. With your other hand hold the plastic tip as close as possible to the joint and depress the button to suck up all the liquid solder. If necessary, clean up the remaining solder with wick.
This is a inexpensive general purpose 40W solding iron. This iron also comes with a stand!
We also carry the 40W Soldering Tip replacement for this soldering iron!