- Input Voltage: 6 to 12V
- Rated Current: 1.5A
- 2.54mm pin holes for connecting with Dupont wire
- Easy wiring with 6P6C RJ25 interface
- Arduino library for easy programming
This module is a shield for the Arduino Uno. It can turn the Arduino pins into Makeblock RJ25 ports. You will be able to connect any Makeblock electronic modules to your Arduino Uno with this shield. This shield provides a stable power, so it can drive many servos and motors.
The HC-05 Bluetooth Shield is an easy way to connect the Arduino to any Bluetooth device. The HC-05 Bluetooth Module is a v2.0+EDR (Enhanced Data Rate) Bluetooth which uses a2.4GHz radio transceiver with 3Mbps modulation.
The terminal shields extends the existing pin from the arduino and converts it into screw terminals, where the user can attach and de-attach connections in a much easier manner.
This RN171 WiFi Shield is a long range WiFi solution for the Arduino. You can start controlling application through the internet with a few simple instructions. The RN171 is also a complete and standalone TCP/IP wireless network module.
This new Adafruit shield makes it easy to use a 16×2 Character LCD. We really like the Blue & White 16×2 LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another pin to control the backlight for a total of 7 pins. That’s almost half of the pins available on a classic Arduino!
The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU. It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.