- Dimension: 10mm diameter, 2.7mm thick
- Voltage: 2V – 5V
- 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
- 11000 RPM at 5V
- Weight: 0.9 gram
These vibe motors are tiny discs, completely sealed up so they’re easy to use and embed. Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.
This NEMA 16 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 330 mA at 12 V, allowing for a holding torque of 2.3 kg-cm (32 oz-in).
This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino.
This small NEMA 8-size hybrid bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 600 mA at 3.9 V, allowing for a holding torque of 180 g-cm (2.5 oz-in). With a weight of 60 g, this is one of the smallest stepper motors we carry.
This sub micro size servo motor has dimensions of 23 x 11 x 29mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
This 2.05″ ?1.45″ ?1.45″gearmotor is a powerful brushed DC motor with metal gearbox intended for operation at 12 V. These units have a 0.61″-long, 6 mm-diameter D-shaped output shaft.