Product Description
Features:
- Operating Voltage: 3.2V
- Operating Current per Phase: 2A
- Torque: 9kg-cm (125oz-in)
- Steps per Revolution: 200
- Shaft Diameter: 6.35mm (1/4″)
Documents:
This NEMA 23 size bipolar stepping motor has a 1.8 Degree step angle (200 steps/revolution). Each phase draws 2A at 3.2V, allowing for a holding torque of 9kg-cm (125 oz-in).
$58.00 |
Features:
Documents:
This gearmotor is a compact (1.50″ x 0.59″ x 0.47″) brushed DC motor with 35: 1 metal gearbox. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 65: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3 0.8-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 9 A without a heat sink.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
This motor driver shield can drive up to 4 DC motor with 2 servo motors or 2 stepper motors with 2 servo motors. This motor driver shield uses 2x L293D motor controller chip with a 74HC595 shift register for all of its functions.