Plastic Enclosure – 190x120x60mm
CASEP-191260Need an enclosure to put your project in This handy plastic enclosure is durable and easy to drill; making it a great use for enclosing your project together!
$12.50 |
Customers Also Viewed
- Hardware, Wheels, Motors
70x8mm Wheel – Yellow
These yellow plastic wheels press-fit onto the 3mm D shafts on many of our motors, including our micro metal gearmotors and our plastic gearmotors with 3mm D-shafts, to make a nice drive solution for small robots. The wheels have silicone tires and measure 70 mm (2.75 ) in diameter. Two additional mounting holes for 4-40 screws make it possible to use the wheel with several of our universal mounting hubs.
Part Number: UWHLL-601426 - Hardware, Motor Hubs, Motors
Servo Arm – Double
These aluminum double servo arms have a length of 2.685 , a width of 0.25 , and utilize the 0.77 hub pattern that can connect directly to your C1 Hitec servo spline. If you need a sturdy arm for your project these are your ideal choice.
Part Number: UMTRR-012546 - Hardware, Project Enclosures
Aluminum Enclosure – 120x95x35mm
These beefy aluminum enclosures may look rough, but they re built tough. This 2mm-thick, die-cast enclosure is rated IP54 against dust and splashing water. Because it s aluminum, it s easy to cut and drill so that you can add LCD screens, buttons and cable connections. If you want to pretty up your project, hit this with some fine-grit sand paper and buff it or just spray paint it! The lid mates nicely to the top of the enclosure and is secured with 10mm long M3 screws (included).
Part Number: CASEM-011351 - Hardware, Motor Hubs, Motors
4mm Aluminum Mounting Hub
This mounting hub has a center diameter of 4mm and can be used to attach wheels and other mechanisms. The mounting hub can be securely tighten onto any 3mm shaft using the set screw. There are 4 separate mounting holes on the hub each with M3 threading.
Part Number: MOTOR-221997
