Protoshield for Arduino Uno Rev3
ARDPC-000801A simple protoshield for arduino uno rev3. This simple and inexpensive protoboard gives you easy prototyping space directly ontop of your arduino.
$14.50 |
Frequently Bought Together…
- Cables & Connectors, Female to Female Jumper Wires, JR Dupont, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping
40 Pin (F-F) Splittable Jumper Wire
Cables & Connectors, Female to Female Jumper Wires, JR Dupont, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping40 Pin (F-F) Splittable Jumper Wire
This is a set of 40 pin splittable jumper wires. Each jumper wire has a length of 200mm (8 inches) and comes with both female ends. This kind of flexible jumper wire is perfect for breadboard use as it fits perfectly in the breadboard.
Part Number: CONCG-400000 - Arduino, Microcontrollers
ATmega328 AVR Dev Board
This board is based on the ATmega328 microcontroller. This board shares the same form factor and functionally as the Arduino Uno Rev3. Some key features of this board includes 14 digital I/O of which 6 has PWM output, 6 analog input, 16MHz clock speed, and USB interface.
Note: This is an ATmega328 microcontroller board and is not a product from Arduino.
Part Number: CARDU-031366 - Cables & Connectors, Breadboard Cables, JR Dupont, Male to Male Jumper Wires
40 Pin (M-M) Splittable Jumper Wire
Cables & Connectors, Breadboard Cables, JR Dupont, Male to Male Jumper Wires40 Pin (M-M) Splittable Jumper Wire
This is a set of 40 pin splittable jumper wires. Each jumper wire has a length of 200mm (8 inches) and comes with both male ends. This kind of flexible jumper wire is perfect for breadboard use as it fits perfectly in the breadboard.
Part Number: CONCG-400011 - Arduino, Microcontrollers
Arduino Uno Rev3
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Part Number: ARDDU-031366 - Breadboard Cables, Cables & Connectors, JR Dupont, Male to Female Jumper Wires, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping
40 Pin (M-F) Splittable Jumper Wire
Breadboard Cables, Cables & Connectors, JR Dupont, Male to Female Jumper Wires, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping40 Pin (M-F) Splittable Jumper Wire
This is a set of 40 pin splittable jumper wires. Each jumper wire has a length of 200mm (8 inches) and comes with both male and female ends. This kind of flexible jumper wire is perfect for breadboard use as it fits perfectly in the breadboard.
Part Number: CONCG-400010
Customers Also Viewed
- Arduino, Arduino Audio, Microcontrollers
MIDI Shield
The MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other musical devices. The MIDI protocol shares many similarities with standard asynchronous serial interfaces, so you can use the UART pins of your Arduino to send and receive MIDI s event messages.
Part Number: ARDMD-012899 - 3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper Motors
CNC Shield v3.51
3D Printing, Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Stepper MotorsCNC Shield v3.51
The CNC Shield makes it really simple to integrate CNC projects with the Arduino. You can add up to 4x A4988 stepper motor drivers to the CNC shield allowing for independent control of 4 bi-polar stepper motors.
Part Number: ARDCE-005510 - Arduino, Microcontrollers
Arduino Pro Mini 328 – 3.3V/8MHz
This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
Part Number: ARDMI-311114 - Arduino, Arduino SD Storage, Microcontrollers
RTC Data Logging Shield
The RTC Data Logging Shield is an easy way to add storage to your Arduino project. It supports SD, SDHC, and MicroSD TF cards and with onboard real time clock. Use the onboard toggle switch to select betweem types of SD cards.
Part Number: ARDDL-007503 - Arduino, Arduino SD Storage, Microcontrollers
CAN-BUS Shield
The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.
Part Number: ARDCN-013262
