Screw Terminal Shield R3
ARDTS-012004The terminal shields extends the existing pin from the arduino and converts it into screw terminals, where the user can attach and de-attach connections in a much easier manner.
$17.00 |
Frequently Bought Together…
- Arduino, Microcontrollers
ATmega328 AVR Dev Board
This board is based on the ATmega328 microcontroller. This board shares the same form factor and functionally as the Arduino Uno Rev3. Some key features of this board includes 14 digital I/O of which 6 has PWM output, 6 analog input, 16MHz clock speed, and USB interface.
Note: This is an ATmega328 microcontroller board and is not a product from Arduino.
Part Number: CARDU-031366 - Arduino, Microcontrollers
Arduino Uno Rev3
The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Part Number: ARDDU-031366 - Breadboard Cables, Cables & Connectors, JR Dupont, Male to Female Jumper Wires, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping
40 Pin (M-F) Splittable Jumper Wire
Breadboard Cables, Cables & Connectors, JR Dupont, Male to Female Jumper Wires, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping40 Pin (M-F) Splittable Jumper Wire
This is a set of 40 pin splittable jumper wires. Each jumper wire has a length of 200mm (8 inches) and comes with both male and female ends. This kind of flexible jumper wire is perfect for breadboard use as it fits perfectly in the breadboard.
Part Number: CONCG-400010 - Cables & Connectors, Female to Female Jumper Wires, JR Dupont, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping
40 Pin (F-F) Splittable Jumper Wire
Cables & Connectors, Female to Female Jumper Wires, JR Dupont, Raspberry Pi, Raspberry Pi Cables & Connectors, Raspberry Pi Prototyping40 Pin (F-F) Splittable Jumper Wire
This is a set of 40 pin splittable jumper wires. Each jumper wire has a length of 200mm (8 inches) and comes with both female ends. This kind of flexible jumper wire is perfect for breadboard use as it fits perfectly in the breadboard.
Part Number: CONCG-400000 - Cables & Connectors, Breadboard Cables, JR Dupont, Male to Male Jumper Wires
40 Pin (M-M) Splittable Jumper Wire
Cables & Connectors, Breadboard Cables, JR Dupont, Male to Male Jumper Wires40 Pin (M-M) Splittable Jumper Wire
This is a set of 40 pin splittable jumper wires. Each jumper wire has a length of 200mm (8 inches) and comes with both male ends. This kind of flexible jumper wire is perfect for breadboard use as it fits perfectly in the breadboard.
Part Number: CONCG-400011
Customers Also Viewed
- Arduino, Arduino Relays, Microcontrollers, Switches & Relays, DC Relays
Relay Shield
This Relay Shield from Evil Mad Scientist is a simple Arduino add-on that gives your Arduino the ability to control a single electromechanical relay for switching loads of up to 24VDC or 40VAC. Each Relay Shield comes equipped with a single pole – double throw (SPDT) sealed relay which can handle a current load of up to 5A. This means that when current is applied to the coil it throws a simple changeover switch, terminating the connection from the NC (Normally Closed) contact to ground and closing the NO (Normally Open) contact. Use them to switch high voltage/high current devices. As this is a shield, it is powered straight from the 5V power supplied by your Arduino, simply slide it into your Arduino or shield-compatible board (like the RedBoard) and you will be good to go!
Part Number: ARDRL-012093 - Arduino, Microcontrollers
Arduino Pro Mini 328 – 3.3V/8MHz
This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
Part Number: ARDMI-311114 - Arduino, Arduino Displays, Graphical LCDs, Microcontrollers
1.77″ Arduino TFT LCD Screen (160x128px)
The screen is 1.77″ diagonal, with 160 x 128 pixel resolution. The TFT library interfaces with the screen’s controller through SPI when using the TFT library. The screen runs on +5 VDC. The microSD slot is accessible through the SD card library. The LED backlight is dimmable with PWM control. This LCD will fit perfectly with the Arduino Esplora and the Arduino Robot.
Part Number: ARDLC-000096 - Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear Motors
VNH5019 Dual Motor Shield – 12A
Arduino, Arduino Motor Drivers, Microcontrollers, Motors, Gear MotorsVNH5019 Dual Motor Shield – 12A
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
Part Number: ARDMD-002507
