Motor Rating @ 6V
- Speed: 0.16sec/60 degree
- Torque: 3.2kg*cm
The FS5103B standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 120 degrees. This servo motor comes with the servo horns and related hardware components.
You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion. The dimensions of this analog feedback motor are 11.57 x 22.75 x 29.45mm. The operating voltage for this motor ranges between 4.8 to 6V. Servo horns and associated hardware are also included in the package.
This NEMA 17 size bipolar stepping motor has a 0.9 Degree step angle (400 steps/revolution). Each phase draws 1.7 mA at 3 V, allowing for a holding torque of 4.9 kg-cm (68 oz-in).
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.
This motor driver shield can drive up to 4 DC motor with 2 servo motors or 2 stepper motors with 2 servo motors. This motor driver shield uses 2x L293D motor controller chip with a 74HC595 shift register for all of its functions.
This gearmotor is a compact (1.50″ x 0.59″ x 0.47″) brushed DC motor with 35: 1 metal gearbox. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.