Small SPDT Microswitch with Roller
SWMIC-001404Micro switches are often used as limit switches as it requires very little force to activate. This SPDT light force micro switch is rated for 125VAC 5A.
$2.75 |
Customers Also Viewed
- Switches & Relays, Limit Switches
SPDT Microswitch with Extended Lever – 62mm
Rated 0 out of 5(0)Micro switches are often used as limit switches as it requires very little force to activate. This SPDT light force micro switch has an extended 62mm lever and is rated for 15A.
Part Number: SWMIC-001133$5.55 - Switches & Relays, DC Relays
12V 2A DPDT DC Relay
Rated 0 out of 5(0)A relay is a switch which can be controlled through a digital signal. This is a board mount DPDT DC mechanic relay. There are 2 separate channels, each channel has NO (Normal Open), COM (Common), NC (Normal Closed) terminals.
Part Number: RELAY-124078$2.30 - Switches & Relays, DC Relays
12V 8A DPDT DC Relay
Rated 0 out of 5(0)A relay is a switch which can be controlled through a digital signal. This is a board mount DPDT DC mechanic relay. There are 2 separate channels, each channel has NO (Normal Open), COM (Common), NC (Normal Closed) terminals.
Part Number: RELAY-412082$6.95 - Switches & Relays, Solid State Relays
5V 8A Solid State Relay Module
Rated 0 out of 5(0)A solid state relay (SSR) is just what it sounds like; an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from lower voltage DC control circuitry. Solid state relays, however, have several advantages over mechanical relays. One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there s no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.
Part Number: RELAY-010685$26.00 - Cables & Connectors, Power Cables & Connectors, Switches & Relays, Latching Buttons
2.1mm DC Barrel In-Line Power Switch
Cables & Connectors, Power Cables & Connectors, Switches & Relays, Latching Buttons2.1mm DC Barrel In-Line Power Switch
Rated 0 out of 5(0)Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you needed! You’ll want to pick up a bunch for your electronic projects. Comes with a 5.5/2.1mm barrel jack on one end an a plug on the other. In between is an in-line switch that is rated for 125V and 2Amps (its normally used for lamps, we suppose). Since most people will be using it with no more than 12VDC, we think it can probably handle up to 5A at that voltage.
Part Number: ADASW-001125$5.95