Motor Rating @ 6V
- Speed: 0.14sec/60 degree
- Torque: 16kg*cm
The FS5115M super high torque standard servo motor has dimensions of 40.8mm x 20.1mm x 38mm. The operating voltage for this motor ranges between 4.8 to 6V with a maximum rotation of roughly 180 degrees. This servo motor comes with the servo horns and related hardware components.
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The little 1.3 0.8-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 9 A without a heat sink.
This gearmotor is a compact (1.50″ x 0.59″ x 0.47″) brushed DC motor with 35: 1 metal gearbox. These units have a 0.365″-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.
You can read this wire with an analog input such as those on an Arduino, to get the servo’s position. That information can be used in robotics to improve stability or even allow ‘recording’ of servo motion. The dimensions of this analog feedback motor are 11.57 x 22.75 x 29.45mm. The operating voltage for this motor ranges between 4.8 to 6V. Servo horns and associated hardware are also included in the package.
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
This 1.46″ x 0.79″ x 0.79″ gearmotor is a brushed DC motor with 120: 1 metal gearbox that has the power to deliver both speed and torque. These units have a 0.276″-long, 4 mm-diameter D-shaped output shaft.