- Carrier Frequency: 38kHz
- Supply Voltage: 2.7 to 5.5V
- Supply Current: 350 A
- Transmission Range: 45M
- Directivity: 45 Degree
The MCP9701A is an analog temperature sensor which has a measurement range of 0 to +70 Degree C.
This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here – just power with 1.8 to 5.5VDC and connect up to 5 conductive pads to the 5 left-hand pins. When a capacitive load is detected (e.g. a person touches one of the conductive contacts) the corresponding LED on the right lights up and the output pin goes low. You can use this to update an existing normal-button project where buttons connect to ground when pressed.
This carrier board is designed to work with any of the MQ-series gas sensors, simplifying the interface from 6 to 3 pins ground, power and analog voltage output that are broken out with a 0.1″ spacing, making the board compatible with 0.1″ headers and standard breadboards and perfboards. This board has two mounting holes and provides convenient pads for mounting the gas sensor s required sensitivity-setting resistor.
This semiconductor gas sensor detects the presence of Carbon Monoxide at concentrations from 10 to 10,000 ppm. The sensor s simple analog voltage interface requires only one analog input pin from your microcontroller.